ATOS Triple Scan – Revolutionary scanning technique
The ATOS Triple Scan uses a specially developed measuring and projection technology from GOM.
Using this brand new technology the ATOS Triple Scan produces a high accuracy and improved measurement of shiny surface, complete data on complex components with deep pockets or fine edges such as turbine blades, reducing the number of individual scans and resulting in a simple handling.
Blue Light Technology
The ATOS Triple Scan is also equipped with blue light technology. The narrowband blue light enables precise measurements to be carried out independently of environmental lighting conditions.
High Resolution 3D Scanner from small to large
ATOS uses high resolution measuring cameras with up to 12 megapixel resolution and specially developed optics for precise measurement.
The accuracy, measurement resolution and measuring area are completely adaptable to the application requirements. This allows for the highest resolution for highly detailed, small parts with measuring volumes down to 38mm, or for extremely fast digitizing of large objects with measuring volumes up to 2m.
This flexibility allows measurement of a large part spectrum with the same sensor head, and when used in combination with TRITOP, the ATOS System is capable of scanning parts of over 30m with a high local resolution.
Industrial advantages for industrial processes
The ATOS 3D Digitizer is an accurate and cost-effective solution in a number of different application areas including:
- Quality Control
- Reverse Engineering
- Rapid Prototyping
- Rapid Milling
- Digital Mock-Up
ATOS 3D Digitizers have been produced and constantly developed since 1995 and with more than 2500 installations in measurement and analysis rooms as well as factory and production halls worldwide, the ATOS has been for a long time an accepted measurement method beside the mechanical measurement machines.
The ATOS sensor combines high data quality in short measurement time with flexibility and stability for industrial environments.
Universal process safety
The ATOS 3D Digitizer is established in industrial process chains. The integration of ATOS in industrial development and production processes helps:
- Reduce production start-up times
- Optimize component quality
- Speed up the time to production
- Maintain high level of quality assurance throughout the entire manufacturing process
- Establish early trend analysis within series production processes
- Reduce rejects and rework, thus saving valuable time and money
- Automated quality control; improving overall quality assurance, requiring fewer personnel and considerably increasing performance.
The ultimate combination of optical and tactile measurement
The GOM Touch Probe combines full-field and touch probe 3D measurement. The GOM Touch Probe allows quick measurement in difficult to access areas, comparison directly to CAD, measurement of primitives, quick measurement of individual points and online alignment.
ATOS and Touch Probe measurements are carried out with one system and are evaluated with one software package. No extra hardware or tracker is required, enabling quick measurement procedures and easy interchange between surface and single point measurement and analysis.
ATOS Plus – automated Photogrammetry
The Plus Box add-on for all ATOS Triple Scan sensors enables fully integrated photogrammetry and reference point collection.
With ATOS Plus a completely automated inspection process can be realized allowing:
- Process safety over long periods
- Higher repeatability and reliability
- Time saving
- Reduced costs of fixturing
The ATOS Plus solution is fully integrated into GOM’s established digitizing and inspection solutions. The Plus Box allows high accuracy, automated photogrammetry and extends existing ATOS Triple Scan sensor heads.
The ATOS Plus features a high resolution photogrammetry camera with up to 29 megapixel resolution and specially developed optics allowing large measurement areas and short working distances. The built-in faceted illumination provides uniform lighting regardless of measurement area or environmental conditions. All ATOS Plus sensors are verified and certified according to VDI acceptance tests.
Integrated, traceable measurement and inspection software
|System Configurations||ATOS II
|ATOS Triple Scan 12M|
|Camera Pixels||2 x 5 000 000||2 x 8 000 000||2 x 12 000 000|
|Measuring Area||38 x 29 –
2000 x 1500 mm²
|38 x 29 –
2000 x 1500 mm²
|170 x 130 –
850 x 640 mm²
|Point Spacing||0.02 – 0.79 mm||0.01 – 0.61 mm||0.04 – 0.20 mm|
|Working Distance||490 – 2000 mm||490 – 2000 mm||490 – 830 mm|
|Cable Length||up to 30m|
|Sensor Positioning||industrial sensor stand, automatic per Robot|
|Part Positioning||manual or automatic rotation table|
|Image Processing Computer||portable or High-End PC|
|Operating System||Windows 7|
|Software||data capture, processing and complete inspection|
|Material & part finish||measurement of shiny and dark surfaces
& complex component geometries
|Ambient lighting||low sensitivity to environment lighting conditions|
|Environmental vibrations||unaffected due to GOMs dynamic referencing system|
|Operating Temperature||5 – 40°C, non condensing|
|Power Supply||90 – 230 V AC|