ATOS ScanBox Series 7
For large and heavy components of up to 6000 mm in size
The ATOS ScanBox Series 7 is mainly used in car manufacturing, in try-out toolmaking and in press shops. The optical 3D measuring system performs complete analysis measurements for comparison in the introductory phase or is used for quality assurance in production.
Large parts such as automobile side panels and attached parts of up to 6 m in size can be measured. The full-field measuring data enables the analysis of hole pattern, trimming and character lines. Heavy and large parts for other applications can also be measured and inspected with the ATOS ScanBox Series 7.
GOM developed the new 8-axis kinematic system for the measurement of very large parts. The combination of a linear axis, a vertical lift and an articulated robot with an integrated cable duct allows high flexibility in positioning the sensor thanks to the 8 degrees of freedom.
Uniform construction components and the modular structure of the ATOS ScanBox Series 7 and 8 enable a demand-oriented extension of the ATOS ScanBox both within Series 7 and to Series 8.
Rotation table working area
The ATOS ScanBox 7260 also has a rotation table working area. This corresponds to the ATOS ScanBox 6130 and enables additional measurements of medium-sized components. The rotation table can be loaded with a pallet system and thus guarantees a quick, repeatable and exact positioning of components.
ATOS ScanBox 7160
ATOS ScanBox 7260