For parts of up to 3000 mm in size in a production environment.

In production metrology, it is important to identify, analyze and correct quality problems as fast as possible. Many parts are to be checked as completely as possible in order to be able to initiate corrective measures and minimize scrap at short notice and in a targeted manner.


Production monitoring
A typical application for the ATOS ScanBox 6130 is quality assurance in production, for example, of attached parts or interior parts, but also product development and tool try-out.

Quick loading and unloading
Measuring 3.1 m, the entrance area of the ATOS ScanBox 6130 is very wide and is secured by a safety light sensor. This allows an uncomplicated use of loading tools, such as cranes, forklift trucks or pallet trucks, in order to be able to place large parts on the measuring machine.

Pallet system
The components and the fixtures can be set up outside of the ATOS ScanBox on changing pallets. The pallets are loaded quickly and reproducibly using positioning pins. This results in a high throughput of parts and is ideally suited for series production.

ATOS ScanBox - Photogrammetry and 3D Scanning of Door Assembly

 Inquiry - ATOS ScanBox Series 6